diff --git a/Core/Inc/LCD_driver.h b/Core/Inc/LCD_driver.h
index e5079a1..4fd5a85 100644
--- a/Core/Inc/LCD_driver.h
+++ b/Core/Inc/LCD_driver.h
@@ -28,8 +28,8 @@
 
 #define SPI1_BASEDR_ADR SPI1_BASE //adresse du reg SPI3 DR pour acces 8 bits (defs std permet accès 16bits seulement)
 
-#define LCD_SCREEN_HEIGHT 282 // ST7365 is 320 (centered, offset = 19)
-#define LCD_SCREEN_WIDTH  470 // ST7365 is 480 (aligned at the left, offset = 10)
+#define LCD_HEIGHT 282 // ST7365 is 320 (centered, offset = 19)
+#define LCD_WIDTH  470 // ST7365 is 480 (aligned at the left, offset = 10)
 
 //CHIP SELECT PIN AND PORT, STANDARD GPIO
 #define LCD_CS_PIN (1<<8)
diff --git a/Core/Inc/dashboard.h b/Core/Inc/dashboard.h
new file mode 100644
index 0000000..7468c71
--- /dev/null
+++ b/Core/Inc/dashboard.h
@@ -0,0 +1,21 @@
+#ifndef __DASHBOARD_H
+#define __DASHBOARD_H
+
+
+#endif
+
+void run_dashboard_loop();
+void init();
+
+void update_values();
+void update_values_setup();
+void update_adc();
+
+void draw_init();
+void draw_battery();
+void draw_distances();
+void draw_power_bars();
+void draw_speed();
+void draw_power();
+void draw_adc();
+void draw_temps();
diff --git a/Core/Inc/main.h b/Core/Inc/main.h
index 687f2cf..877f5d1 100644
--- a/Core/Inc/main.h
+++ b/Core/Inc/main.h
@@ -1,4 +1,4 @@
-/* USER CODE BEGIN Header */
+/* USER CODE BEGIN */
 /**
   ******************************************************************************
   * @file           : main.h
@@ -16,7 +16,7 @@
   *
   ******************************************************************************
   */
-/* USER CODE END Header */
+/* USER CODE END */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __MAIN_H
@@ -30,31 +30,31 @@ extern "C" {
 #include "stm32f1xx_hal.h"
 
 /* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
+/* USER CODE BEGIN */
 
-/* USER CODE END Includes */
+/* USER CODE END */
 
 /* Exported types ------------------------------------------------------------*/
-/* USER CODE BEGIN ET */
+/* USER CODE BEGIN */
 
-/* USER CODE END ET */
+/* USER CODE END */
 
 /* Exported constants --------------------------------------------------------*/
-/* USER CODE BEGIN EC */
+/* USER CODE BEGIN */
 
-/* USER CODE END EC */
+/* USER CODE END */
 
 /* Exported macro ------------------------------------------------------------*/
-/* USER CODE BEGIN EM */
+/* USER CODE BEGIN */
 
-/* USER CODE END EM */
+/* USER CODE END */
 
 /* Exported functions prototypes ---------------------------------------------*/
 void Error_Handler(void);
 
-/* USER CODE BEGIN EFP */
+/* USER CODE BEGIN */
 
-/* USER CODE END EFP */
+/* USER CODE END */
 
 /* Private defines -----------------------------------------------------------*/
 #define DB10_Pin GPIO_PIN_13
@@ -108,9 +108,9 @@ void Error_Handler(void);
 #define DB12_Pin GPIO_PIN_9
 #define DB12_GPIO_Port GPIOB
 
-/* USER CODE BEGIN Private defines */
+/* USER CODE BEGIN */
 
-/* USER CODE END Private defines */
+/* USER CODE END */
 
 #ifdef __cplusplus
 }
diff --git a/Core/Inc/stm32f1xx_hal_conf.h b/Core/Inc/stm32f1xx_hal_conf.h
index d25098d..95f1601 100644
--- a/Core/Inc/stm32f1xx_hal_conf.h
+++ b/Core/Inc/stm32f1xx_hal_conf.h
@@ -1,4 +1,4 @@
-/* USER CODE BEGIN Header */
+/* USER CODE BEGIN */
 /**
   ******************************************************************************
   * @file    stm32f1xx_hal_conf.h
@@ -15,7 +15,7 @@
   *
   ******************************************************************************
   */
-/* USER CODE END Header */
+/* USER CODE END */
 
 /* Define to prevent recursive inclusion -------------------------------------*/
 #ifndef __STM32F1xx_HAL_CONF_H
diff --git a/Core/Src/LCD_driver.c b/Core/Src/LCD_driver.c
index e228641..8635668 100644
--- a/Core/Src/LCD_driver.c
+++ b/Core/Src/LCD_driver.c
@@ -23,79 +23,40 @@
 //	copies or substantial portions of the Software.
 //
 
-/* Includes ------------------------------------------------------------------*/
 #include "LCD_driver.h"
 #include "5x5_font.h"
 #include "stm32f1xx.h"
 
-/* Global Variables ------------------------------------------------------------------*/
-volatile uint16_t LCD_HEIGHT = LCD_SCREEN_HEIGHT;
-volatile uint16_t LCD_WIDTH = LCD_SCREEN_WIDTH;
-
-/* SPI3 & GPIOs init function */
-//void LCD_SPI_Init(void) {
-////__HAL_RCC_SPI3_CLK_ENABLE();
-//  RCC->APB1ENR1 |= RCC_APB1ENR1_SPI3EN;// SPI3 clock enable
-//  RCC->AHB2ENR |= RCC_AHB2ENR_GPIOCEN;// GPIOC clock enable
-//
-//  /** CS & DC GPIO signals configuration
-//   PC8     ------> LCD_CS_PIN
-//   PC11    ------> LCD_DC_PIN
-//   */
-//  GPIOC->BSRR = LCD_CS_PIN | (LCD_DC_PIN << 16);//CS à 1 et DC à 0
-//  GPIOC->MODER |= (1 << 16) | (1 << 22);//GPIO out
-//  GPIOC->MODER &= ~((1 << 17) | (1 << 23));//mise à 0
-//  GPIOC->OTYPER &= (GPIO_OTYPER_OT8 | GPIO_OTYPER_OT11);//PC8 & 11 en PP
-//  GPIOC->OSPEEDR |= (3 << 16) | (3 << 22);//High speed
-//
-//  /**SPI3 GPIO Configuration
-//   PC10     ------> SPI3_SCK
-//   PC12     ------> SPI3_MOSI */
-//  GPIOC->AFR[1] |= (6 << 8) | (6 << 16);//PC10 en AF6 : SPI3_SCK, PC12 en AF6 : SPI3_MOSI
-//  GPIOC->AFR[1] &= 0xFFF6F6FF;//Mise à 0
-//  GPIOC->MODER |= (2 << 20) | (2 << 24);//MODE AF
-//  GPIOC->MODER &= 0xFEEFFFFF;//Mise à 0
-//  GPIOC->OTYPER &= (GPIO_OTYPER_OT10 | GPIO_OTYPER_OT12);//PC10 & 12 en PP
-//  GPIOC->OSPEEDR |= (3 << 24) | (3 << 20);//High speed
-//
-//  /*Configure module SPI3*/
-//  SPI3->CR1 = SPI_CR1_SSM | SPI_CR1_SSI;//CS soft, SSI à 1 sinon decl. mode fault
-//  SPI3->CR1 |= SPI_CR1_MSTR;// 0 sauf SPE et mode Master, BR = 0 => /2=> Fsck=40M
-//  SPI3->CR2 = 0x0700 | SPI_CR2_FRXTH;// | SPI_CR2_NSSP;			//mode 8 bits, ITs disabled, no DMA, FRXTH doit être à 1 en 8 bits
-//  SPI3->CR1 |= SPI_CR1_SPE;
-//
-//}
-/* Send command (char) to LCD via SPI bus */
 void LCD_Write_Command(uint8_t Command) {
-  while ((SPI1->SR & SPI_SR_BSY) != 0);
+  while ((SPI1->SR & SPI_SR_BSY) != 0); // Wait that everything is sent before changing the RS pin
   CMD
   ;
   while ((SPI1->SR & SPI_SR_TXE) == 0);
-  SPI1->DR = Command;// Cast sur pointeur, pour ecriture 8 bits. Sinon l'acces 16 bits provoque un tfert 16 bits
+  SPI1->DR = Command;
 }
 /* Send Data (char) to LCD via SPI bus */
 void LCD_Write_Data(uint8_t Data) {
-  while ((SPI1->SR & SPI_SR_BSY) != 0);//Attendre fin envoi trame
+  while ((SPI1->SR & SPI_SR_BSY) != 0); // Wait that everything is sent before changing the RS pin
   DATA
   ;
-  while ((SPI1->SR & SPI_SR_TXE) == 0);// Waiting for TX register to be available.
+  while ((SPI1->SR & SPI_SR_TXE) == 0);
   SPI1->DR = Data;
 }
 void LCD_Write_Data16(uint16_t data) {
-  while ((SPI1->SR & SPI_SR_BSY) != 0);// Wait until SPI is not busy
+  while ((SPI1->SR & SPI_SR_BSY) != 0); // Wait that everything is sent before changing the RS pin
   DATA
   ;
-  while ((SPI1->SR & SPI_SR_TXE) == 0);// Wait for TX buffer empty
+  while ((SPI1->SR & SPI_SR_TXE) == 0);
   SPI1->DR = (data >> 8) & 0xFF;// Send MSB
-  while ((SPI1->SR & SPI_SR_TXE) == 0);// Wait for TX buffer empty
+  while ((SPI1->SR & SPI_SR_TXE) == 0);
   SPI1->DR = data & 0xFF;// Send LSB
 }
 
 /* Set the frame to draw into and sends a write into frame command */
 void LCD_Set_Address(uint16_t X1, uint16_t Y1, uint16_t X2, uint16_t Y2) {
   LCD_Write_Command(0x2A);
-  LCD_Write_Data16(X1 + 10);
-  LCD_Write_Data16(X2 + 10);
+  LCD_Write_Data16(X1);
+  LCD_Write_Data16(X2);
 
   LCD_Write_Command(0x2B);
   LCD_Write_Data16(Y1 + 19);
@@ -104,37 +65,6 @@ void LCD_Set_Address(uint16_t X1, uint16_t Y1, uint16_t X2, uint16_t Y2) {
   LCD_Write_Command(0x2C);
 }
 
-//void LCD_Set_Rotation(uint8_t Rotation) {
-//
-//  uint8_t screen_rotation = Rotation;
-//
-//  LCD_Write_Command(0x36);
-//
-//  switch (screen_rotation)
-//  case SCREEN_VERTICAL_1:
-//    LCD_Write_Data(0x40 | 0x08);
-//  LCD_WIDTH = 240;
-//  LCD_HEIGHT = 320;
-//  break;
-//  case SCREEN_HORIZONTAL_1:
-//  LCD_Write_Data(0x20 | 0x08);
-//  LCD_WIDTH = 320;
-//  LCD_HEIGHT = 240;
-//  break;
-//  case SCREEN_VERTICAL_2:
-//  LCD_Write_Data(0x80 | 0x08);
-//  LCD_WIDTH = 240;
-//  LCD_HEIGHT = 320;
-//  break;
-//  case SCREEN_HORIZONTAL_2:
-//  LCD_Write_Data(0x40 | 0x80 | 0x20 | 0x08);
-//  LCD_WIDTH = 320;
-//  LCD_HEIGHT = 240;
-//  break;
-//  default:
-//  break;
-//}
-
 void LCD_HardwareReset() {
   HAL_GPIO_WritePin(DRESET_GPIO_Port, DRESET_Pin, GPIO_PIN_SET);
   HAL_Delay(1);
@@ -166,8 +96,7 @@ void LCD_Init(void) {
 
 // Configure orientation stuff
   LCD_Write_Command(0x36);
-  LCD_Write_Data(0b10110100);
-
+  LCD_Write_Data(0b00111100);
 
 // Exit sleep
   LCD_Write_Command(0x11);
@@ -181,8 +110,8 @@ void LCD_Init(void) {
   LCD_Fill_Screen(WHITE);
 
 // Draw colors columns
-  LCD_Set_Address(30, 30, LCD_SCREEN_WIDTH - 30, LCD_SCREEN_HEIGHT - 30);
-  uint32_t size = (LCD_SCREEN_WIDTH - 59) * 20;
+  LCD_Set_Address(30, 30, LCD_WIDTH - 30, LCD_HEIGHT - 30);
+  uint32_t size = (LCD_WIDTH - 59) * 20;
   LCD_Draw_Colour_Burst(BLACK, size);
   LCD_Draw_Colour_Burst(WHITE, size);
   LCD_Draw_Colour_Burst(BLUE, size);
@@ -192,86 +121,41 @@ void LCD_Init(void) {
 
 // Draw rectangles in the angles
   LCD_Draw_Rectangle(1, 1, 20, 20, RED);
-  LCD_Draw_Rectangle(LCD_SCREEN_WIDTH - 21, 1, 20, 20, GREEN);
-  LCD_Draw_Rectangle(LCD_SCREEN_WIDTH - 21, LCD_SCREEN_HEIGHT - 21, 20, 20,
-  MAGENTA);
-  LCD_Draw_Rectangle(1, LCD_SCREEN_HEIGHT - 21, 20, 20, BLUE);
+  LCD_Draw_Rectangle(LCD_WIDTH - 21, 1, 20, 20, GREEN);
+  LCD_Draw_Rectangle(LCD_WIDTH - 21, LCD_HEIGHT - 21, 20, 20,
+  BLACK);
+  LCD_Draw_Rectangle(1, LCD_HEIGHT - 21, 20, 20, BLUE);
 
-// STARTING ROTATION
-//LCD_Set_Rotation(SCREEN_HORIZONTAL_1);
+  // Test drawing text
+  char text[] = "test bro";
+  LCD_Draw_Text(&text, 30, 100, WHITE, 20, RED);
 }
 
-//INTERNAL FUNCTION OF LIBRARY
-/*Sends block colour information to LCD*/
+//INTERNAL FUNCTIONS OF THE LIBRARY
+
 void LCD_Draw_Colour_Burst(uint16_t color, uint32_t size) {
-  while ((SPI1->SR & SPI_SR_BSY) != 0);// Wait until SPI is not busy
+  while ((SPI1->SR & SPI_SR_BSY) != 0); // Wait that everything is sent before changing the RS pin
   DATA
   ;
   for (uint32_t j = 0; j < size; j++) {
-    while ((SPI1->SR & SPI_SR_TXE) == 0);// Waiting for TX register to be available.
+    while ((SPI1->SR & SPI_SR_TXE) == 0);
     SPI1->DR = (color >> 8) & 0xFF;
-    while ((SPI1->SR & SPI_SR_TXE) == 0);// Waiting for TX register to be available.
+    while ((SPI1->SR & SPI_SR_TXE) == 0);
     SPI1->DR = color & 0xFF;
   }
 }
 
-//FILL THE ENTIRE SCREEN WITH SELECTED COLOUR (either #define-d ones or custom 16bit)
-/*Sets address (entire screen) and Sends Height*Width ammount of colour information to LCD*/
 void LCD_Fill_Screen(uint16_t color) {
   LCD_Draw_Rectangle(0, 0, LCD_WIDTH, LCD_HEIGHT, color);
 }
 
-//DRAW PIXEL AT XY POSITION WITH SELECTED COLOUR
-//
-//Location is dependant on screen orientation. x0 and y0 locations change with orientations.
-//Using pixels to draw big simple structures is not recommended as it is really slow
-//Try using either rectangles or lines if possible
-//
-//void LCD_Draw_Pixel(uint16_t X, uint16_t Y, uint16_t Colour) {
-//  if ((X >= LCD_WIDTH) || (Y >= LCD_HEIGHT)) return;//OUT OF BOUNDS!
-//
-////ADDRESS
-//  LCD_Write_Command(0x2A);
-//
-////XDATA
-//  DATA
-//  ;
-//  CS_ON;
-//  SPI3->DR = (X >> 8) | (X << 8);//inversion MSB / LSB pour envoi des 2 mots 8 bits en 1W 16bits
-////Pas d'att si FIFO full (TX buffer Empty=0) car juste 2 écriture 16 bits tiennent dans FIFO
-//  SPI3->DR = ((X + 1) >> 8) | ((X + 1) << 8);
-//  while ((SPI3->SR & SPI_SR_BSY) != 0);//Attendre fin envoi trame
-//  CS_OFF;
-//
-////ADDRESS
-//  LCD_Write_Command(0x2B);
-//
-////YDATA
-//  DATA
-//  ;
-//  CS_ON;
-//  SPI3->DR = (Y >> 8) | (Y << 8);
-//  SPI3->DR = ((Y + 1) >> 8) | ((Y + 1) << 8);
-//  while ((SPI3->SR & SPI_SR_BSY) != 0);//Attendre fin envoi trame
-//  CS_OFF;
-//
-////ADDRESS
-//  LCD_Write_Command(0x2C);
-//
-////COLOUR
-//  DATA
-//  ;
-//  CS_ON;
-//  SPI3->DR = (Colour >> 8) | (Colour << 8);
-//  while ((SPI3->SR & SPI_SR_BSY) != 0);//Attendre fin envoi trame
-//  CS_OFF;
-//}
 
-//DRAW RECTANGLE OF SET SIZE AND HEIGTH AT X and Y POSITION WITH CUSTOM COLOUR
-//
-//Rectangle is hollow. X and Y positions mark the upper left corner of rectangle
-//As with all other draw calls x0 and y0 locations dependant on screen orientation
-//
+void LCD_Draw_Pixel(uint16_t x, uint16_t y, uint16_t color) {
+  if ((x >= LCD_WIDTH) || (y >= LCD_HEIGHT)) return;
+
+  LCD_Set_Address(x, y, x, y);
+  LCD_Draw_Colour_Burst(color, 1);
+}
 
 void LCD_Draw_Rectangle(
     uint16_t X,
@@ -290,7 +174,6 @@ void LCD_Draw_Rectangle(
   LCD_Draw_Colour_Burst(Colour, Height * Width);
 }
 
-//DRAW LINE FROM X,Y LOCATION to X+Width,Y LOCATION
 void LCD_Draw_Horizontal_Line(
     uint16_t X,
     uint16_t Y,
@@ -304,7 +187,6 @@ void LCD_Draw_Horizontal_Line(
   LCD_Draw_Colour_Burst(Colour, Width);
 }
 
-//DRAW LINE FROM X,Y LOCATION to X,Y+Height LOCATION
 void LCD_Draw_Vertical_Line(
     uint16_t X,
     uint16_t Y,
@@ -318,9 +200,6 @@ void LCD_Draw_Vertical_Line(
   LCD_Draw_Colour_Burst(Colour, Height);
 }
 
-/*********************Partie de la Lib issue de LCD_GFX**************************/
-
-/*Draw hollow circle at X,Y location with specified radius and colour. X and Y represent circles center */
 void LCD_Draw_Hollow_Circle(
     uint16_t X,
     uint16_t Y,
@@ -355,7 +234,7 @@ void LCD_Draw_Hollow_Circle(
   }
 }
 
-/*Draw filled circle at X,Y location with specified radius and colour. X and Y represent circles center */
+
 void LCD_Draw_Filled_Circle(
     uint16_t X,
     uint16_t Y,
@@ -391,7 +270,6 @@ void LCD_Draw_Filled_Circle(
 //TODO:	https://stackoverflow.com/questions/1201200/fast-algorithm-for-drawing-filled-circles
 }
 
-/*Draw a hollow rectangle between positions X0,Y0 and X1,Y1 with specified colour*/
 void LCD_Draw_Hollow_Rectangle_Coord(
     uint16_t X0,
     uint16_t Y0,
@@ -435,7 +313,6 @@ void LCD_Draw_Hollow_Rectangle_Coord(
 
 }
 
-/*Draw a filled rectangle between positions X0,Y0 and X1,Y1 with specified colour*/
 void LCD_Draw_Filled_Rectangle_Coord(
     uint16_t X0,
     uint16_t Y0,
diff --git a/Core/Src/dashboard.c b/Core/Src/dashboard.c
new file mode 100644
index 0000000..dff8943
--- /dev/null
+++ b/Core/Src/dashboard.c
@@ -0,0 +1,26 @@
+#include "dashboard.h"
+#include "LCD_driver.h"
+
+void run_dashboard_loop() {
+
+  init();
+  while(1) {
+
+  }
+
+}
+
+void init() {
+  LCD_Init();
+
+  // draw base
+}
+void update_values() {
+  // UART send 0201 04 4084 03
+}
+void update_values_setup() {
+  // UART send 0201 2F D58D 03
+}
+void update_adc() {
+  // UART send 0201 20 2462 03
+}
diff --git a/Core/Src/main.c b/Core/Src/main.c
index 1b15857..80d9e7b 100644
--- a/Core/Src/main.c
+++ b/Core/Src/main.c
@@ -1,4 +1,4 @@
-/* USER CODE BEGIN Header */
+/* USER CODE BEGIN */
 /**
   ******************************************************************************
   * @file           : main.c
@@ -15,52 +15,55 @@
   *
   ******************************************************************************
   */
-/* USER CODE END Header */
+/* USER CODE END */
 /* Includes ------------------------------------------------------------------*/
 #include "main.h"
 
-/* Private includes ----------------------------------------------------------*/
-/* USER CODE BEGIN Includes */
 
-/* USER CODE END Includes */
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN */
+#include "dashboard.h"
+#include "LCD_driver.h"
+
+/* USER CODE END */
 
 /* Private typedef -----------------------------------------------------------*/
-/* USER CODE BEGIN PTD */
+/* USER CODE BEGIN */
 
-/* USER CODE END PTD */
+/* USER CODE END */
 
 /* Private define ------------------------------------------------------------*/
-/* USER CODE BEGIN PD */
+/* USER CODE BEGIN */
 
-/* USER CODE END PD */
+/* USER CODE END */
 
 /* Private macro -------------------------------------------------------------*/
-/* USER CODE BEGIN PM */
+/* USER CODE BEGIN */
 
-/* USER CODE END PM */
+/* USER CODE END */
 
 /* Private variables ---------------------------------------------------------*/
 SPI_HandleTypeDef hspi1;
 
 UART_HandleTypeDef huart1;
 
-/* USER CODE BEGIN PV */
+/* USER CODE BEGIN */
 
-/* USER CODE END PV */
+/* USER CODE END */
 
 /* Private function prototypes -----------------------------------------------*/
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
 static void MX_SPI1_Init(void);
 static void MX_USART1_UART_Init(void);
-/* USER CODE BEGIN PFP */
+/* USER CODE BEGIN */
 
-/* USER CODE END PFP */
+/* USER CODE END */
 
 /* Private user code ---------------------------------------------------------*/
-/* USER CODE BEGIN 0 */
+/* USER CODE BEGIN */
 
-/* USER CODE END 0 */
+/* USER CODE END */
 
 /**
   * @brief  The application entry point.
@@ -69,47 +72,46 @@ static void MX_USART1_UART_Init(void);
 int main(void)
 {
 
-  /* USER CODE BEGIN 1 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END 1 */
+/* USER CODE END */
 
   /* MCU Configuration--------------------------------------------------------*/
 
   /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
   HAL_Init();
 
-  /* USER CODE BEGIN Init */
+/* USER CODE BEGIN */
 
-  /* USER CODE END Init */
+/* USER CODE END */
 
   /* Configure the system clock */
   SystemClock_Config();
 
-  /* USER CODE BEGIN SysInit */
+/* USER CODE BEGIN */
 
-  /* USER CODE END SysInit */
+/* USER CODE END */
 
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
   MX_SPI1_Init();
   MX_USART1_UART_Init();
-  /* USER CODE BEGIN 2 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END 2 */
+  run_dashboard_loop();
+
+/* USER CODE END */
 
   /* Infinite loop */
-  /* USER CODE BEGIN WHILE */
+/* USER CODE BEGIN */
   while (1)
   {
-    LCD_Init();
-    HAL_Delay(10000);
-    HAL_Delay(10);
 
-    /* USER CODE END WHILE */
+/* USER CODE END */
 
-    /* USER CODE BEGIN 3 */
+/* USER CODE BEGIN */
   }
-  /* USER CODE END 3 */
+/* USER CODE END */
 }
 
 /**
@@ -158,13 +160,13 @@ void SystemClock_Config(void)
 static void MX_SPI1_Init(void)
 {
 
-  /* USER CODE BEGIN SPI1_Init 0 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END SPI1_Init 0 */
+/* USER CODE END */
 
-  /* USER CODE BEGIN SPI1_Init 1 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END SPI1_Init 1 */
+/* USER CODE END */
   /* SPI1 parameter configuration*/
   hspi1.Instance = SPI1;
   hspi1.Init.Mode = SPI_MODE_MASTER;
@@ -182,9 +184,9 @@ static void MX_SPI1_Init(void)
   {
     Error_Handler();
   }
-  /* USER CODE BEGIN SPI1_Init 2 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END SPI1_Init 2 */
+/* USER CODE END */
 
 }
 
@@ -196,13 +198,13 @@ static void MX_SPI1_Init(void)
 static void MX_USART1_UART_Init(void)
 {
 
-  /* USER CODE BEGIN USART1_Init 0 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END USART1_Init 0 */
+/* USER CODE END */
 
-  /* USER CODE BEGIN USART1_Init 1 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END USART1_Init 1 */
+/* USER CODE END */
   huart1.Instance = USART1;
   huart1.Init.BaudRate = 115200;
   huart1.Init.WordLength = UART_WORDLENGTH_8B;
@@ -215,9 +217,9 @@ static void MX_USART1_UART_Init(void)
   {
     Error_Handler();
   }
-  /* USER CODE BEGIN USART1_Init 2 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END USART1_Init 2 */
+/* USER CODE END */
 
 }
 
@@ -229,9 +231,9 @@ static void MX_USART1_UART_Init(void)
 static void MX_GPIO_Init(void)
 {
   GPIO_InitTypeDef GPIO_InitStruct = {0};
-  /* USER CODE BEGIN MX_GPIO_Init_1 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END MX_GPIO_Init_1 */
+/* USER CODE END */
 
   /* GPIO Ports Clock Enable */
   __HAL_RCC_GPIOC_CLK_ENABLE();
@@ -302,14 +304,14 @@ static void MX_GPIO_Init(void)
   /*Configure peripheral I/O remapping */
   __HAL_AFIO_REMAP_PD01_ENABLE();
 
-  /* USER CODE BEGIN MX_GPIO_Init_2 */
+/* USER CODE BEGIN */
 
-  /* USER CODE END MX_GPIO_Init_2 */
+/* USER CODE END */
 }
 
-/* USER CODE BEGIN 4 */
+/* USER CODE BEGIN */
 
-/* USER CODE END 4 */
+/* USER CODE END */
 
 /**
   * @brief  This function is executed in case of error occurrence.
@@ -317,13 +319,13 @@ static void MX_GPIO_Init(void)
   */
 void Error_Handler(void)
 {
-  /* USER CODE BEGIN Error_Handler_Debug */
+/* USER CODE BEGIN */
   /* User can add his own implementation to report the HAL error return state */
   __disable_irq();
   while (1)
   {
   }
-  /* USER CODE END Error_Handler_Debug */
+/* USER CODE END */
 }
 #ifdef USE_FULL_ASSERT
 /**
@@ -335,9 +337,9 @@ void Error_Handler(void)
   */
 void assert_failed(uint8_t *file, uint32_t line)
 {
-  /* USER CODE BEGIN 6 */
+/* USER CODE BEGIN */
   /* User can add his own implementation to report the file name and line number,
      ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
-  /* USER CODE END 6 */
+/* USER CODE END */
 }
 #endif /* USE_FULL_ASSERT */