653 lines
21 KiB
C
653 lines
21 KiB
C
#include "dashboard.h"
|
||
#include "font.h"
|
||
#include "icons.h"
|
||
//#include "monomaniacone12pt.h"
|
||
#include "monomaniacone14pt.h"
|
||
#include "monomaniacone20pt.h"
|
||
#include "monomaniacone72pt.h"
|
||
#include "usart.h"
|
||
#include "crc.h"
|
||
#include "float16.h"
|
||
#include "math.h"
|
||
#include <stdio.h>
|
||
|
||
const char *fault_code_strings[] = { "none", "over voltage", "under voltage",
|
||
"driver fault", "abs over current", "over tmp FET", "over tmp motor",
|
||
"gate drv over v", "gate drv under v", "MCU under voltage",
|
||
"boot watchdog rst", "encoder SPI error", "encoder scos min",
|
||
"encoder scos max", "flash corruption", "high ofst cur s1",
|
||
"high ofst cur s2", "high ofst cur s3", "unbalanced curs", "brake fault",
|
||
"resolver LOT", "resolver DOS", "resolver LOS", "app flash corupt",
|
||
"mot flash corupt", "encoder no magnet", "encoder str magnet",
|
||
"phase filter fault" };
|
||
|
||
void run_dashboard_loop_test() {
|
||
LCD_Init();
|
||
LCD_Fill_Screen(COLOR_OFF, 1);
|
||
LCD_Fill_Screen(COLOR_BG, 0);
|
||
draw_init();
|
||
uint32_t i = 0;
|
||
while (1) {
|
||
|
||
draw_battery(654, i * 100 / 4, 1321, 343);
|
||
draw_speed(i * 1000 / 4, i % 30);
|
||
int16_t duty = 1000 - (int16_t) i * 1000 / 200;
|
||
draw_power_bars(duty);
|
||
draw_power(100 * i / 20 * (duty < 0 ? -1 : 1), duty, 60 * 10);
|
||
|
||
draw_adc(i % 34, (400 - i + 16) % 34, i % 34 >= 2.5,
|
||
(400 - i + 16) % 34 >= 2.5);
|
||
|
||
draw_temps((4 * i) % 900, ((10 * i) + 450) % 900);
|
||
|
||
HAL_Delay(50);
|
||
if (i == 400) {
|
||
i = 0;
|
||
} else {
|
||
i++;
|
||
}
|
||
}
|
||
|
||
}
|
||
|
||
uint8_t initialized = 0;
|
||
void run_dashboard_loop() {
|
||
|
||
LCD_Init();
|
||
LCD_Fill_Screen(COLOR_OFF, 1);
|
||
LCD_Fill_Screen(COLOR_BG, 0);
|
||
HAL_Delay(1000);
|
||
|
||
uint8_t i = 0;
|
||
while (1) {
|
||
uint8_t refresh_slow = (i % 10) == 0;
|
||
uint8_t refresh_mid = (i % 3) == 0;
|
||
update_values(refresh_slow, refresh_mid);
|
||
update_adc();
|
||
|
||
HAL_Delay(50);
|
||
i++;
|
||
if (i == 120) {
|
||
i = 0;
|
||
}
|
||
}
|
||
|
||
}
|
||
|
||
// refresh_slow = 0 if it should not refresh the low-refresh rate information.
|
||
// refresh_mid = 0 if it should not refresh the mid-refresh rate information.
|
||
void update_values(uint8_t refresh_slow, uint8_t refresh_mid) {
|
||
// UART send 0201 2F D58D 03
|
||
uint8_t packet[1];
|
||
packet[0] = 0x2F;// COMM_GET_VALUES_SETUP
|
||
USART1_SendPacket(packet, 1);
|
||
|
||
// Read length (big-endian)
|
||
uint8_t len = USART1_ReceiveUInt16() & 0xFF;
|
||
if (len != 0x46) {
|
||
HAL_Delay(500);
|
||
USART1_Flush();
|
||
return;// Timed out
|
||
}
|
||
// Read packet
|
||
USART1_ReceiveByte();// Packet id
|
||
int16_t temp_fet = USART1_ReceiveInt16();
|
||
int16_t temp_motor = USART1_ReceiveInt16();
|
||
USART1_ReceiveInt32();// Current tot
|
||
int32_t current_in_tot = USART1_ReceiveInt32();
|
||
int16_t duty_cycle = USART1_ReceiveInt16();
|
||
USART1_ReceiveInt32();// rpm
|
||
int32_t speed = USART1_ReceiveInt32();
|
||
int16_t input_voltage_filtered = USART1_ReceiveInt16();
|
||
int16_t battery_level = USART1_ReceiveInt16();
|
||
USART1_ReceiveInt32();// ah tot
|
||
USART1_ReceiveInt32();// ah charge tot
|
||
USART1_ReceiveInt32();// wh tot
|
||
USART1_ReceiveInt32();// wh charge tot
|
||
USART1_ReceiveInt32();// distance
|
||
int32_t distance_abs = USART1_ReceiveInt32();
|
||
USART1_ReceiveInt32();// pid pos now
|
||
uint8_t fault_code = USART1_ReceiveByte();
|
||
USART1_ReceiveByte();// Controller Id
|
||
USART1_ReceiveByte();// Num VESCs
|
||
USART1_ReceiveInt32();// wh battery left
|
||
uint32_t distance_life = USART1_ReceiveUInt32();
|
||
USART1_ReceiveUInt32();// System time
|
||
|
||
USART1_ReceiveUInt16();// CRC
|
||
// End byte
|
||
if (USART1_ReceiveByte() != 0x03) {
|
||
return;// Invalid packet
|
||
}
|
||
// CRC check
|
||
// if (crc != crc16(data, len)) {
|
||
// return;
|
||
// }
|
||
if (!initialized) {
|
||
draw_init();
|
||
initialized = 1;
|
||
refresh_slow = 1;
|
||
refresh_mid = 1;
|
||
}
|
||
|
||
//speed = (int32_t) (((float) speed) / 1.609344);
|
||
//float wheel_diameter = 0.246; // in meter
|
||
//speed = ((float) rpm) * 3.14159265359 * wheel_diameter * 60 / 1000;
|
||
|
||
draw_power_bars(duty_cycle);
|
||
if (refresh_mid) {
|
||
draw_speed((int32_t) (((float) speed) * 3.6), fault_code);
|
||
draw_power(current_in_tot, duty_cycle, input_voltage_filtered);
|
||
}
|
||
if (refresh_slow) {
|
||
draw_battery(input_voltage_filtered, battery_level, distance_abs,
|
||
distance_life);
|
||
draw_temps(temp_fet, temp_motor);
|
||
}
|
||
}
|
||
void update_adc() {
|
||
// Replies to 0x24 0x65 for command id: 0, 1, 18, 19, 1B, 1D, C9, CA
|
||
// 0 1 24 25 27 29 201 202
|
||
|
||
uint8_t packet[3];
|
||
packet[0] = 0x24;// COMM_CUSTOM_APP_DATA
|
||
packet[1] = 0x65;// reFloat package interface
|
||
packet[2] = 0x01;// command id
|
||
USART1_SendPacket(packet, 3);
|
||
|
||
uint8_t len = USART1_ReceiveUInt16() & 0xFF;
|
||
if (len == 0xFF) {// len is usually 0x3A = 58, but may be shorter.
|
||
HAL_Delay(500);
|
||
USART1_Flush();
|
||
return;// Timed out
|
||
}
|
||
|
||
// Read packet
|
||
USART1_ReceiveByte();// packet id
|
||
USART1_ReceiveByte();// reFloat package interface
|
||
USART1_ReceiveByte();// command id
|
||
USART1_ReceiveInt32();// Balance current
|
||
USART1_ReceiveInt32();// IMU Pitch
|
||
USART1_ReceiveInt32();// IMU Roll
|
||
USART1_ReceiveByte();// State
|
||
uint8_t beep_fs_state = USART1_ReceiveByte();// Beep reason + footpad sensors state
|
||
uint32_t adc1_f32 = USART1_ReceiveUInt32();
|
||
uint32_t adc2_f32 = USART1_ReceiveUInt32();
|
||
|
||
// Results if command id 31 (0x1F) was working:
|
||
// uint8_t mask = USART1_ReceiveByte();// mask // 0x00
|
||
// uint8_t extra_flags = USART1_ReceiveByte();// extra flags // 0x02
|
||
// uint32_t time = USART1_ReceiveInt32();// time // 0x00 10 00 41
|
||
// uint8_t state_and_time = USART1_ReceiveByte();// state_and_mode // 0x9B
|
||
// uint8_t flags_and_footpad = USART1_ReceiveByte();// flags_and_footpad // 0x8A
|
||
// uint8_t stop_cond_and_sat = USART1_ReceiveByte();// stop_cond_and_sat // 0x29
|
||
// uint8_t alert_reason = USART1_ReceiveByte();// alert_reason // 0x41
|
||
//
|
||
// USART1_ReceiveInt16();//motor.speed
|
||
// USART1_ReceiveInt16();//motor.erpm
|
||
// USART1_ReceiveInt16();//motor.current
|
||
// USART1_ReceiveInt16();//motor.dir_current
|
||
// USART1_ReceiveInt16();//motor.filt_current
|
||
// USART1_ReceiveInt16();//motor.duty_cycle
|
||
// USART1_ReceiveInt16();//motor.batt_voltage
|
||
// USART1_ReceiveInt16();//motor.batt_current
|
||
// USART1_ReceiveInt16();//motor.mosfet_temp
|
||
// USART1_ReceiveInt16();//motor.motor_temp
|
||
// USART1_ReceiveInt16();//imu.pitch
|
||
// USART1_ReceiveInt16();//imu.balance_pitch
|
||
// USART1_ReceiveInt16();//imu.roll
|
||
// uint16_t adc1_f16 = USART1_ReceiveUInt16();//footpad.adc1
|
||
// uint16_t adc2_f16 = USART1_ReceiveUInt16();//footpad.adc2
|
||
// USART1_ReceiveInt16();//remote.input
|
||
//// May have other ignored values.
|
||
// int16_t adc1 = refloat_float16_to_int16_scaled(adc1_f16);
|
||
// int16_t adc2 = refloat_float16_to_int16_scaled(adc2_f16);
|
||
|
||
if (!initialized) {
|
||
draw_init();
|
||
initialized = 1;
|
||
}
|
||
float adc1 = *((float*) &adc1_f32);
|
||
float adc2 = *((float*) &adc2_f32);
|
||
|
||
uint8_t fs_state = beep_fs_state & 0b11;
|
||
uint8_t adc1_en = 0;
|
||
uint8_t adc2_en = 0;
|
||
if (fs_state == 1) {
|
||
if (adc1 > adc2) {
|
||
adc1_en = 1;
|
||
} else {
|
||
adc2_en = 2;
|
||
}
|
||
} else if (fs_state == 2) {
|
||
adc1_en = 1;
|
||
adc2_en = 1;
|
||
}
|
||
|
||
draw_adc((int32_t) 10 * adc1, (int32_t) 10 * adc2, adc1_en, adc2_en);
|
||
|
||
// Make sure other values are discarded
|
||
HAL_Delay(100);
|
||
USART1_Flush();
|
||
}
|
||
|
||
#define LEFT_CENTER_COL1 38
|
||
#define LEFT_CENTER_COL2 116
|
||
#define RIGHT_CENTER 400
|
||
|
||
void draw_init() {
|
||
|
||
// Draw footpad sensors rect
|
||
uint16_t sensor_width = 126;
|
||
LCD_DrawHollowRoundRect(RIGHT_CENTER - sensor_width / 2, 70, sensor_width, 73,
|
||
15, 0, 6, COLOR_PRIMARY, 0, 0);
|
||
LCD_Draw_Rectangle(RIGHT_CENTER - 3, 76, 6, 61, COLOR_PRIMARY);
|
||
|
||
// Draw temp icons
|
||
LCD_Draw_Icon_3(motort_icon, LEFT_CENTER_COL1 - MOTORT_ICON_WIDTH / 2, 73,
|
||
MOTORT_ICON_WIDTH, MOTORT_ICON_HEIGHT, COLOR_SECONDARY, COLOR_ERROR,
|
||
COLOR_BG);
|
||
LCD_Draw_Icon_3(chipt_icon, LEFT_CENTER_COL2 - CHIPT_ICON_WIDTH / 2, 73,
|
||
CHIPT_ICON_WIDTH, CHIPT_ICON_HEIGHT, COLOR_PRIMARY, COLOR_ERROR,
|
||
COLOR_BG);
|
||
|
||
// GFX_DrawChar(40, 40, '!', &monomaniacone20pt, COLOR_PRIMARY, COLOR_BG);
|
||
// GFX_DrawChar(60, 40, '2', &monomaniacone20pt, COLOR_PRIMARY, COLOR_BG);
|
||
// GFX_DrawChar(80, 40, '3', &monomaniacone20pt, COLOR_SECONDARY, COLOR_BG);
|
||
// GFX_DrawChar(100, 40, '4', &monomaniacone20pt, COLOR_SECONDARY, COLOR_BG);
|
||
// GFX_DrawChar(120, 40, '5', &monomaniacone20pt, COLOR_ERROR, COLOR_BG);
|
||
|
||
// GFX_DrawText(LCD_WIDTH / 2, 50, "Bonjour Monsieur !", &monomaniacone12pt,
|
||
// COLOR_SECONDARY, COLOR_BG, 1, -2);
|
||
// GFX_DrawText(LCD_WIDTH / 2, 70, "Bonjour Monsieur !", &monomaniacone14pt,
|
||
// COLOR_SECONDARY, COLOR_BG, 1, -2);
|
||
// GFX_DrawText(LCD_WIDTH / 2, 100, "Bonjour MONSieur !", &monomaniacone20pt,
|
||
// COLOR_SUCCESS, COLOR_BG, 1, -2);
|
||
|
||
// Draw a rectangle with different top/bottom radii
|
||
// LCD_DrawHollowRoundRect(10, 10, 100, 50, 10, 0, 4, BLACK, COLOR_PRIMARY, 1);
|
||
//// Draw a pill-shaped rectangle (same radius for all corners)
|
||
// LCD_DrawHollowRoundRect(20, 70, 80, 30, 15, 15, 2, COLOR_SUCCESS, 0, 0);
|
||
//// Draw a square with rounded corners
|
||
// LCD_DrawHollowRoundRect(50, 100, 60, 60, 10, 10, 6, COLOR_ERROR, 0, 0);
|
||
// LCD_DrawHollowRoundRect(130, 100, 60, 60, 10, 10, 0, 0, COLOR_ERROR, 1);
|
||
// LCD_DrawHollowRoundRect(136, 106, 48, 48, 4, 4, 0, 0, COLOR_PRIMARY, 1);
|
||
//
|
||
// LCD_DrawHollowRoundRect(200, 100, 4, 20, 6, 6, 0, 0, COLOR_PRIMARY, 1);
|
||
// LCD_DrawHollowRoundRect(200, 125, 6, 20, 6, 6, 0, 0, COLOR_PRIMARY, 1);
|
||
// LCD_DrawHollowRoundRect(200, 150, 8, 20, 6, 6, 0, 0, COLOR_PRIMARY, 1);
|
||
}
|
||
|
||
// Displays the battery voltage and percent, with the trip and life distances
|
||
// Input voltage from COMM_GET_VALUES_SETUP, scale 10
|
||
// battery percent (level) from COMM_GET_VALUES_SETUP, scale 10
|
||
// trip distance from COMM_GET_VALUES_SETUP, scale 1000, in m
|
||
// life distance (odometer) from COMM_GET_VALUES_SETUP, in m
|
||
int16_t last_voltage = 0;
|
||
int32_t last_percent = 0;
|
||
int32_t last_trip_dist = 0;
|
||
void draw_battery(
|
||
int16_t voltage,
|
||
int32_t percent,
|
||
int32_t trip_dist,
|
||
uint32_t life_dist) {
|
||
|
||
if (voltage == last_voltage && percent / 10 == last_percent
|
||
&& trip_dist / 100000 == last_trip_dist) {
|
||
return;
|
||
}
|
||
last_voltage = voltage;
|
||
last_percent = percent / 10;
|
||
last_trip_dist = trip_dist / 100000;
|
||
|
||
uint16_t bar_width = LCD_WIDTH - 12;
|
||
uint16_t bar_height = 22;
|
||
uint16_t filled_bar_width = (((float) (percent / 10)) / 100.0) * bar_width;
|
||
if (filled_bar_width < 6) {
|
||
filled_bar_width = 6;// Must be at least the size of the border radius.
|
||
}
|
||
uint16_t filled_bar_end_x = 4 + 2 + filled_bar_width;
|
||
//uint16_t text_y_12 = LCD_HEIGHT - 6 - (22 - 16) / 2;
|
||
uint16_t text_y_14 = LCD_HEIGHT - 6 - (22 - 18) / 2;
|
||
|
||
char voltage_text[8];
|
||
sprintf(voltage_text, "%.1fV", ((float) voltage) / 10.0);
|
||
char percent_text[6];
|
||
sprintf(percent_text, "%lu%%", percent / 10);
|
||
char distances_text[20];
|
||
sprintf(distances_text, "%.1fKm / %luKm",
|
||
((float) (trip_dist / 100000)) / 10.0, life_dist / 1000);
|
||
|
||
// Drawing the bars
|
||
LCD_DrawHollowRoundRect(4, LCD_HEIGHT - (bar_height + 4) - 4, bar_width + 4,
|
||
bar_height + 4, 8, 8, 2, COLOR_FG, COLOR_BG, 1);
|
||
if (filled_bar_width > 0) {
|
||
LCD_DrawHollowRoundRect(4 + 2, LCD_HEIGHT - (bar_height + 2) - 4,
|
||
filled_bar_width, bar_height, 6, 6, 0, 0, COLOR_SUCCESS, 1);
|
||
}
|
||
|
||
// Drawing the values
|
||
uint16_t left_x = 10;
|
||
uint16_t right_x = LCD_WIDTH - 10;
|
||
|
||
if (percent > 20 * 10) {
|
||
// Drawing the voltage to the left
|
||
left_x = 10
|
||
+ GFX_DrawText(left_x, text_y_14, voltage_text, &monomaniacone14pt,
|
||
COLOR_BG, COLOR_SUCCESS, 0, -2);
|
||
} else {
|
||
// Drawing the voltage to the right
|
||
right_x = -10
|
||
+ GFX_DrawText(right_x, text_y_14, voltage_text, &monomaniacone14pt,
|
||
COLOR_FG, COLOR_BG, 2, -2);
|
||
}
|
||
|
||
if (percent > 50 * 10) {
|
||
// Drawing the distances on the left
|
||
GFX_DrawText(left_x, text_y_14, distances_text, &monomaniacone14pt,
|
||
COLOR_BG, COLOR_SUCCESS, 0, -3);
|
||
} else {
|
||
// Drawing the distances on the right
|
||
GFX_DrawText(right_x, text_y_14, distances_text, &monomaniacone14pt,
|
||
COLOR_FG, COLOR_BG, 2, -3);
|
||
}
|
||
|
||
if (percent > 80 * 10) {
|
||
// Drawing the distances on the left
|
||
GFX_DrawText(filled_bar_end_x - 4, text_y_14, percent_text,
|
||
&monomaniacone14pt,
|
||
COLOR_BG, COLOR_SUCCESS, 2, 0);
|
||
} else {
|
||
// Drawing the distances on the right
|
||
GFX_DrawText(filled_bar_end_x + 4, text_y_14, percent_text,
|
||
&monomaniacone14pt,
|
||
COLOR_FG, COLOR_BG, 0, 0);
|
||
}
|
||
|
||
}
|
||
|
||
// Displays the power bars at the top
|
||
// Duty from COMM_GET_VALUES, scale 1000
|
||
uint16_t last_width = 0;
|
||
uint8_t last_regen = 0;
|
||
void draw_power_bars(int16_t dutyy) {
|
||
uint16_t offset = LCD_WIDTH / 2;
|
||
uint16_t max_width = LCD_WIDTH / 2;
|
||
uint8_t regen = dutyy < 0;
|
||
uint16_t duty = regen ? -dutyy : dutyy;
|
||
duty *= 1 / 0.8;// 80% duty means the bar is at 100%
|
||
uint16_t width = ((float) duty / 1000.0) * max_width;
|
||
|
||
uint16_t last_origin = last_regen ? offset - last_width : offset;
|
||
uint16_t origin = regen ? offset - width : offset;
|
||
uint16_t color = regen ? COLOR_ERROR : COLOR_SUCCESS;
|
||
|
||
if (regen != last_regen) {
|
||
LCD_Draw_Rectangle(last_origin, 0, last_width, 20, COLOR_BG);
|
||
LCD_Draw_Rectangle(origin, 0, width, 20, color);
|
||
last_regen = regen;
|
||
last_width = width;
|
||
|
||
} else if (width != last_width) {
|
||
if (regen) {
|
||
if (last_origin < origin) {
|
||
LCD_Draw_Rectangle(last_origin, 0, origin - last_origin, 20, COLOR_BG);
|
||
} else {
|
||
LCD_Draw_Rectangle(origin, 0, last_origin - origin, 20, color);
|
||
}
|
||
} else {
|
||
if (last_width < width) {
|
||
LCD_Draw_Rectangle(origin + last_width, 0, width - last_width, 20,
|
||
color);
|
||
} else {
|
||
LCD_Draw_Rectangle(origin + width, 0, last_width - width, 20, COLOR_BG);
|
||
}
|
||
}
|
||
|
||
last_width = width;
|
||
}
|
||
}
|
||
|
||
// Displays the huge speed counter with avg and max values.
|
||
// Speed from COMM_GET_VALUES_SETUP, scale 1000
|
||
uint32_t last_speed = 30;
|
||
uint32_t max_speed = 0;
|
||
uint32_t last_avg_speed = 30;
|
||
uint32_t avg_speed_tot = 0;// You need to ride super fast for a super long time for it to overflow ;)
|
||
uint32_t avg_speed_count = 0;
|
||
uint8_t last_fault_code = 0;
|
||
void draw_speed(int32_t speedd, uint8_t fault_code) {
|
||
|
||
uint32_t speed = speedd < 0 ? -speedd / 1000 : speedd / 1000;
|
||
if (speed >= 100) {
|
||
speed = 99;
|
||
}
|
||
|
||
// update max speed
|
||
uint8_t update_stats = 0;
|
||
if (speed > max_speed) {
|
||
max_speed = speed;
|
||
update_stats = 1;
|
||
}
|
||
// update avg speed
|
||
avg_speed_tot += speed;
|
||
avg_speed_count += 1;
|
||
uint32_t avg_speed = avg_speed_tot / avg_speed_count;
|
||
if (last_avg_speed != avg_speed) {
|
||
last_avg_speed = avg_speed;
|
||
update_stats = 1;
|
||
}
|
||
|
||
// Draw
|
||
if (last_speed != speed) {
|
||
last_speed = speed;
|
||
uint16_t erase_width = 85;// width to erase from center
|
||
char speed_text[4];
|
||
sprintf(speed_text, "%lu", speed);
|
||
LCD_Draw_Rectangle(LCD_WIDTH / 2 - erase_width, 22, 2 * erase_width, 110,
|
||
COLOR_BG);
|
||
GFX_DrawText(LCD_WIDTH / 2, 32 + 95, speed_text, &monomaniacone72pt,
|
||
COLOR_FG, COLOR_BG, 1, -5);
|
||
}
|
||
|
||
uint16_t erase_width = 90;// width to erase from center
|
||
if (last_fault_code != fault_code) {
|
||
last_fault_code = fault_code;
|
||
if (fault_code == 0) {
|
||
update_stats = 1;
|
||
erase_width = 100;
|
||
} else {
|
||
update_stats = 0;
|
||
char fault_text[50];// Increased size to accommodate longer strings
|
||
|
||
if (fault_code <= FAULT_CODE_MAX) {
|
||
sprintf(fault_text, "%u %s", fault_code,
|
||
fault_code_strings[fault_code]);
|
||
} else {
|
||
sprintf(fault_text, "%u unknown fault", fault_code);
|
||
}
|
||
|
||
LCD_Draw_Rectangle(LCD_WIDTH / 2 - erase_width, 140, 2 * erase_width, 25,
|
||
COLOR_BG);
|
||
GFX_DrawText(LCD_WIDTH / 2, 159, fault_text, &monomaniacone14pt,
|
||
COLOR_ERROR, COLOR_BG, 1, -3);
|
||
}
|
||
}
|
||
if (update_stats) {
|
||
char stats_text[20];
|
||
sprintf(stats_text, "avg: %lu max: %lu", avg_speed, max_speed);
|
||
LCD_Draw_Rectangle(LCD_WIDTH / 2 - erase_width, 140, 2 * erase_width, 25,
|
||
COLOR_BG);
|
||
GFX_DrawText(LCD_WIDTH / 2, 159, stats_text, &monomaniacone14pt,
|
||
COLOR_SECONDARY, COLOR_BG, 1, -3);
|
||
}
|
||
}
|
||
|
||
int16_t last_current = 99;
|
||
uint16_t last_duty = 99;
|
||
int32_t last_power = 1000;
|
||
// Displays Current, Duty, Watts
|
||
// Current from COMM_GET_VALUES, scale 100
|
||
// Duty from COMM_GET_VALUES, scale 1000
|
||
// Input voltage from COMM_GET_VALUES, scale 10
|
||
void draw_power(int32_t current_i, int16_t duty_i, int16_t voltage_i) {
|
||
if (duty_i < 0 && current_i > 0) {
|
||
current_i = -current_i;
|
||
}
|
||
int16_t current = current_i / 100;
|
||
uint16_t duty = duty_i < 0 ? -duty_i / 10 : duty_i / 10;
|
||
int32_t power = ((int32_t) voltage_i) * ((int32_t) current_i) / 10000 * 10;
|
||
|
||
if (power >= 1000) {
|
||
power = power / 100 * 100;
|
||
} else if (power <= -1000) {
|
||
power = power / 100 * 100;
|
||
}
|
||
|
||
if (current != last_current) {
|
||
last_current = current;
|
||
if (current >= 100) {
|
||
current = 99;
|
||
} else if (current <= -100) {
|
||
current = -99;
|
||
}
|
||
|
||
char text[8];
|
||
sprintf(text, "%dA", current);
|
||
LCD_Draw_Rectangle(LEFT_CENTER_COL1 - 38, 30, 2 * 39, 35, COLOR_BG);
|
||
GFX_DrawText(LEFT_CENTER_COL1, 60, text, &monomaniacone20pt,
|
||
COLOR_PRIMARY, COLOR_BG, 1, -2);
|
||
}
|
||
if (duty != last_duty) {
|
||
last_duty = duty;
|
||
if (duty >= 100) {
|
||
duty = 99;
|
||
}
|
||
|
||
char text[8];
|
||
sprintf(text, "%u%%", duty);
|
||
LCD_Draw_Rectangle(LEFT_CENTER_COL2 - 39, 30, 2 * 39, 35, COLOR_BG);
|
||
GFX_DrawText(LEFT_CENTER_COL2, 60, text, &monomaniacone20pt,
|
||
COLOR_PRIMARY, COLOR_BG, 1, -2);
|
||
}
|
||
if (power != last_power) {
|
||
last_power = power;
|
||
if (power >= 10000) {
|
||
power = 9999;
|
||
} else if (power <= -10000) {
|
||
power = -9999;
|
||
}
|
||
|
||
char text[10];
|
||
sprintf(text, "%ldW", power);
|
||
LCD_Draw_Rectangle(RIGHT_CENTER - 70, 30, 2 * 70, 35, COLOR_BG);
|
||
GFX_DrawText(RIGHT_CENTER, 60, text, &monomaniacone20pt,
|
||
COLOR_PRIMARY, COLOR_BG, 1, -2);
|
||
}
|
||
|
||
}
|
||
|
||
uint16_t last_adc1 = 1000;
|
||
uint16_t last_adc2 = 1000;
|
||
uint8_t last_adc1_en = 0;
|
||
uint8_t last_adc2_en = 0;
|
||
// Displays the two ADC voltages
|
||
// 2 voltages from reFloat - COMM_CUSTOM_APP_DATA, scale 10, adcx_en are booleans.
|
||
void draw_adc(
|
||
int32_t adc1_scaled,
|
||
int32_t adc2_scaled,
|
||
uint8_t adc1_en,
|
||
uint8_t adc2_en) {
|
||
uint16_t adc1 = adc1_scaled < 0 ? -adc1_scaled : adc1_scaled;
|
||
uint16_t adc2 = adc2_scaled < 0 ? -adc2_scaled : adc2_scaled;
|
||
if (adc1 > 33) {
|
||
adc1 = 33;
|
||
}
|
||
if (adc2 > 33) {
|
||
adc2 = 33;
|
||
}
|
||
// Max filled height = 39
|
||
if (adc1 != last_adc1 || adc1_en != last_adc1_en) {
|
||
uint16_t filled_height = adc1 * 39 / 33;
|
||
uint16_t free_height = 61 - filled_height;
|
||
|
||
// Reset the top part
|
||
LCD_Draw_Rectangle(RIGHT_CENTER - 3 - 54 + 2, 76 + 2, 54 - 4, 2, COLOR_BG);
|
||
LCD_Draw_Rectangle(RIGHT_CENTER - 3 - 54 + 0, 76 + 4, 54, free_height - 4,
|
||
COLOR_BG);
|
||
|
||
// Draw the colored zone
|
||
uint16_t color = adc1_en ? COLOR_SUCCESS : COLOR_ERROR;
|
||
LCD_Draw_Rectangle(RIGHT_CENTER - 3 - 54, 76 + free_height, 54,
|
||
filled_height, color);
|
||
|
||
// Draw the text
|
||
char text[8];
|
||
sprintf(text, "%.1fV", ((float) adc1) / 10);
|
||
GFX_DrawText(RIGHT_CENTER - 3 - 27, 76 + free_height - 2, text,
|
||
&monomaniacone14pt, color, COLOR_BG, 1, -2);
|
||
|
||
last_adc1 = adc1;
|
||
last_adc1_en = adc1_en;
|
||
}
|
||
// Max filled height = 39
|
||
if (adc2 != last_adc2 || adc2_en != last_adc2_en) {
|
||
uint16_t filled_height = adc2 * 39 / 33;
|
||
uint16_t free_height = 61 - filled_height;
|
||
|
||
// Reset the top part
|
||
LCD_Draw_Rectangle(RIGHT_CENTER + 3 + 2, 76 + 2, 54 - 4, 2, COLOR_BG);
|
||
LCD_Draw_Rectangle(RIGHT_CENTER + 3 + 0, 76 + 4, 54, free_height - 4,
|
||
COLOR_BG);
|
||
|
||
// Draw the colored zone
|
||
uint16_t color = adc2_en ? COLOR_SUCCESS : COLOR_ERROR;
|
||
LCD_Draw_Rectangle(RIGHT_CENTER + 3, 76 + free_height, 54, filled_height,
|
||
color);
|
||
|
||
// Draw the text
|
||
char text[8];
|
||
sprintf(text, "%.1fV", ((float) adc2) / 10);
|
||
GFX_DrawText(RIGHT_CENTER + 3 + 27, 76 + free_height - 2, text,
|
||
&monomaniacone14pt, color, COLOR_BG, 1, -2);
|
||
|
||
last_adc2 = adc2;
|
||
last_adc2_en = adc2_en;
|
||
}
|
||
|
||
}
|
||
|
||
uint16_t last_temp_fet = 1000;
|
||
uint16_t last_temp_mot = 1000;
|
||
// Displays the controller and motor temperatures
|
||
// 2 temperatures from COMM_GET_VALUES_SETUP, scale 10
|
||
void draw_temps(int16_t temp_fet_scaled, int16_t temp_motor_scaled) {
|
||
uint16_t temp_fet = temp_fet_scaled < 0 ? 0 : temp_fet_scaled / 10;
|
||
uint16_t temp_mot = temp_motor_scaled < 0 ? 0 : temp_motor_scaled / 10;
|
||
if (temp_fet > 99) {
|
||
temp_fet = 99;
|
||
}
|
||
if (temp_mot > 99) {
|
||
temp_mot = 99;
|
||
}
|
||
|
||
if (temp_mot != last_temp_mot) {
|
||
last_temp_mot = temp_mot;
|
||
|
||
char text[8];
|
||
sprintf(text, "%u>C", temp_mot);
|
||
LCD_Draw_Rectangle(LEFT_CENTER_COL1 - 38, 138, 2 * 39, 25, COLOR_BG);
|
||
GFX_DrawText(LEFT_CENTER_COL1, 159, text, &monomaniacone14pt,
|
||
COLOR_SECONDARY, COLOR_BG, 1, -1);
|
||
}
|
||
if (temp_fet != last_temp_fet) {
|
||
last_temp_fet = temp_fet;
|
||
|
||
char text[8];
|
||
sprintf(text, "%u>C", temp_fet);
|
||
LCD_Draw_Rectangle(LEFT_CENTER_COL2 - 39, 138, 2 * 39, 25, COLOR_BG);
|
||
GFX_DrawText(LEFT_CENTER_COL2, 159, text, &monomaniacone14pt, COLOR_PRIMARY,
|
||
COLOR_BG, 1, -1);
|
||
}
|
||
}
|